Deriving the Absolute Reflectance of Lunar Surface Using SELENE (Kaguya) Multiband Imager Data

The absolute reflectance of the Moon has long been debated because it has been suggested (Hillier et al. in Icarus 151:205–225, 1999) that there is a large discrepancy between the absolute reflectance of the Moon derived from Earth-based telescopic data and that derived from remote-sensing data which are calibrated using laboratory-measured reflectance spectra of Apollo 16 bulk soil 62231. Here we derive the absolute reflectance of the lunar surface using spectral data newly acquired by SELENE (Kaguya) Multiband Imager and Spectral Profiler. The results indicate that the reflectance of the Apollo 16 standard site, which has been widely used as an optical standard in previous Earth-based telescopic and remote-sensing observations derived by Multiband Imager, is 47% at 415 nm and 67% to 76% at 750 to 1550 nm of the value for the Apollo 16 mature soil measured in an Earth-based laboratory. The data also suggest that roughly 60% of the difference is caused by the difference in soil composition and/or maturity between the 62231 sampling site and the Apollo 16 standard site and that the remaining 40% difference can be explained by the difference between the compaction states of the laboratory and the actual lunar surface. Consideration of the compaction states of the surface soil demonstrates its importance for understanding the spectral characteristics of the lunar surface. We also explain and evaluate data analysis procedures to derive reflectance from Multiband Imager data.     

含Ti钎料钎焊碳纤维复合材料与钛合金的界面微观分析

采用几种钎料对碳纤维复合材料与钛合金进行真空钎焊,重点探讨了含Ti钎料钎焊碳纤维复合材料与钛合金连接界面的微观组织。研究表明,含Ti钎料润湿连接碳纤维复合材料与钛合金TC4的过程可分为五个阶段:钎料与母材的物理接触以及钎料的熔化;原子的扩散;反应层的生成;反应层沉积变厚,润湿复合材料;形成接头。研究结果对于碳纤维复合材料与钛合金的连接及在重要航天器中的应用具有重要参考价值。     

The effect of neglecting VLBI reference station clock offsets on UT1 estimates

Very Long Baseline Interferometry (VLBI) allows to monitor universal time (UT1) by conducting regular international experiments. Such dedicated observation networks are equipped with different hardware components, which require different processing strategies when the data are correlated. As the timing units at each stations are usually offset with respect to universal time (UTC) this effect should be considered during correlation processing. Thus, it is investigated how neglecting of these offsets theoretically impacts the estimation of UT1. Three different strategies for the proper handling of the timing offset will be discussed and their advantages/drawbacks will be pointed out. Moreover, it is studied how neglecting of these timing offsets affects UT1 time-series and how such a missing correction can be applied a posteriori. Although the discussed effect is for most of the UT1 experiments smaller than the formal error of the estimates, it is important to consider station clock offsets properly in next-generation VLBI systems, which are expected to improve accuracy of results by about one order of magnitude.     

Concept study on Deep Space Orbit Transfer Vehicle

In this paper, the concept of Orbit Transfer Vehicle for Deep Space Exploration (Deep Space OTV) is proposed, and its effectiveness and feasibility are discussed. Basic concept is the separation of two functions required for the deep space exploration, the transportation to the destination, and the exploration at the destination. Deep Space OTV is a spacecraft specialized for the transportation to the deep space destination. It is an expendable spacecraft propelled by solar electric propulsion. The payload of Deep Space OTV is Explorer, which is a spacecraft specialized for the exploration at the deep space destination. The effectiveness of the concept is discussed qualitatively, focused on the merits of the separations of two functions. The feasibility of Deep Space OTV is discussed based on the conceptual design of the spacecraft and its applicability to deep space missions. Several deep space missions are modeled and the payload capacity of Deep Space OTV is estimated. The missions include Asteroid rendezvous, Mars orbiter, Lunar lander, and so on.     

Lunar apex–antapex cratering asymmetry as an impactor recorder in the Earth–Moon system

The degree of apex–antapex cratering asymmetry of a synchronously rotating satellite primarily depends on the mean encounter velocity of impactors with respect to the planetary system and the orbital velocity of the satellite. This means that we can estimate the mean encounter velocity of impactors by observing the apex–antapex cratering asymmetry, if the relationship between these is known. To apply this technique to the Moon, we attempt to derive the relationship between the mean encounter velocity of impactors and the degree of the lunar cratering asymmetry as a function of time, considering the temporal variation in the lunar orbital velocity during the last 4.0 Gyr. We used the cratering asymmetry of Zahnle et al. [Zahnle, K., Schenk, P., Sobieszczyk, S. et al. Differential cratering of synchronously rotating satellites by ecliptic comets. Icarus 153, 111–129, 2001] to obtain the relationship. Applying this relationship enables us to estimate the impactor’s velocity of the Earth–Moon system from an investigation of the spatial distribution of lunar craters. Furthermore, we re-evaluate the cratering asymmetry’s influence on lunar cratering chronology.     

Optimization of fault-tolerant thruster configurations for satellite control

The fault tolerance of spacecraft actuators significantly affects the reliability of satellites and the likelihood of successful missions. To enhance the fault tolerance of the actuators, this study derives optimal fault-tolerant configurations of fixed thrusters that maximize the controllability of a fully-actuated or underactuated satellite. The proposed method optimizes thrust and torque directions generated by the thrusters. Thus a cost function in terms of the thruster locations and directions is defined as the summation of the generated control forces and torques with respect to the body-fixed frame. The optimal configuration is obtained by the successive use of an energy potential method that is motivated by Thomson’s problem. Some numerical examples are provided that show the effectiveness of the proposed formulation and optimization method.     

基于线性稳定性分析的蒸发毛细弯液面的显式稳定判据

蒸发毛细弯液面稳定性对毛细抽吸换热装置的运行有着重要意义。由于弯 液面的蒸发80％是发生在一个微小的区域,即薄膜区,因此可以预期,不稳定性将最先 产生于这一区域。薄膜区的界面会受到多种作用力的影响,例如脱离压力,蒸发质量损失, 蒸气反冲以及温度梯度引起的热毛细作用,其机理相当复杂。本文对处于蒸发状态下的非等 温弯液面薄膜区进行线性稳定分析,并通过施加小扰动于界面演化方程,获得了蒸发弯液面 固有稳定性判定准则。该准则仅取决于毛细管弯液面温度、工质热物性以及毛细管几何尺寸 ,对毛细抽吸换热装置的应用有很好的实际指导意义。
     

A balloon-borne very long baseline interferometry experiment in the stratosphere: Systems design and developments

The balloon-borne very long baseline interferometry (VLBI) experiment is a technical feasibility study for performing radio interferometry in the stratosphere. The flight model has been developed. A balloon-borne VLBI station will be launched to establish interferometric fringes with ground-based VLBI stations distributed over the Japanese islands at an observing frequency of approximately 20?GHz as the first step. This paper describes the system design and development of a series of observing instruments and bus systems. In addition to the advantages of avoiding the atmospheric effects of absorption and fluctuation in high frequency radio observation, the mobility of a station can improve the sampling coverage (“uv-coverage”) by increasing the number of baselines by the number of ground-based counterparts for each observation day. This benefit cannot be obtained with conventional arrays that solely comprise ground-based stations. The balloon-borne VLBI can contribute to a future progress of research fields such as black holes by direct imaging.     

International coordination of space solar power related activities

Because the need for energy is global, and many energy networks are already interdependent, because no one country has sufficient technological capability or sufficient funds to provide a space solar powered solution on its own, and because any such solution will require international regulation, international coordination will be vital to any attempt to produce energy for Earth from space. This will be made easier by the fact that work on the subject has already been widely publicized and distributed and cooperative efforts have already been made. Various coordinating approaches are described and the need to forge partnerships between government, industry and academia — with greater involvement of all non-space groups concerned with energy — is emphasized. A “terracing approach” to the actual implementation of SPS is suggested and outlined.